Clamp in galvanized steel suitable for use with Ø8 mm wire ropes
Material: Body in FE 430B steel - U-bolt in FE 360B steel
Finish: Electrolytic zinc plating
When creating tightening slots it is recommended to use thimbles suitable and compatible with the diameter of the rope considered.
Locking must be done using at least 3 clamps for each cable lug.
For each type there is a so-called "yield index".
In general, it must therefore be considered that the use of the clamps, as a terminal clamping system, involves a loss of resistance of approximately 20% for the rope
In this case it is therefore emphasized that the "yield index" is 80%
ATTENTION: incorrect assembly (not performed as described above ...) can further reduce up to 60%
the resistance of the assembly with respect to the breaking load of the rope.