U-CLAMP BOLT FOR HORIZONTAL SECTION

art. 561

 

A round bar stainless steel AISI 304 Ø18 mm anchor with a 300 mm shank that has a marked cross-tip for a length of 120 mm and must be inserted into the hole for a length of at least 180 mm

A larger diameter to the previous articles with diameter of 16 mm

The end is formed from a strong plate welded to the shank using the TIG method.

The plate is 8 mm thick x 30 mm wide.

This plate has been drilled with two Ø12 mm holes for the stainless steel clamp.

A very simple and intuitive anchor to use.

Excellent method of fixing protection and progression Ø12 mm cables on horizontal and diagonal sections up to a maximum slope of 30°

INSTALLATION

The anchor must be inserted into the rock for a minimum depth of 180 mm (or completely …).

Use a Ø20 mm drill bit.

Weight: 790 gr