RING SAFETY 13 - CONNECTOR WITH BAR A316L

art. 534

 

WARNING! CARABINER CURRENTLY OUT OF PRODUCTION

This carabiner responds to the need for a bomber carabiner for universal use.

Delivers high performance in all cases where the carabiner must provide total and absolute safety: artificial and indoor climbing walls, outdoor top-ropes…everywhere!

The stainless steel (AISI 316L) allows the placement of anchors in areas with harsh environmental and atmospheric conditions, as it is unreactive to mud, rain, ice and seasonal temperature changes.

• The gate can therefore be opened quickly and with one hand.
• Important technical aspects: when the gate has been screwed opened, the screw remains fixed in position (with a specific braking system) and completely open, allowing the rope to be easily threaded through the carabiner. Once the gate is closed the rope can not slip out accidentally.
• Low weight without compromising strength.
• Exceptional durability: at the point of contact with the rope the steel thick is maximum (12 mm).
• Available at a very competitive price: equal to art. 165
• Always remember to close the gate once the rope has been inserted!!!
• The gate only screws on one side on a M10 thread, whilst the other side operates using a “push” system.
• It replaces the previous version (Art.308 – no longer in production).
• The upper part of the carabiner is welded diagonally with a 4mm-thick bar (“closed” type). This fixes the carabiner in place and prevents any accidental twisting. The carabiner therefore always faces the correct way. After intense use however the rope may cause wear on this carabiner (nothing lasts forever!).
• Using pliers it is possible to clip the bar (which is welded at one side) and bend in until it is possible to remove the carabiner and replace it with another, reversing the procedure.

TECHNICAL SPECIFICATIONS

• Material of the body: Stainless Steel AISI 316L
• Made in Italy
• From 2013 the material used in the majority of our anchors is now stainless steel AISI 316L, which offers a higher resistance to marine corrosion than the former AISI 304. To highlight this change each article is stamped with the relevant symbols.
• Available in “MARINA” Version - Art. 533 M highly resistant to saline corrosion: the anchors have been marked with a fish symbol and the initials “INOX"