MULTI-MONTI Ø7,5x60 - EX 10 GALVANIZED

art. 289 NEW

 

This screw is used to place anchors for the first exploration of a pothole.

New mounts with new threaded extension, new tip with larger and more sharp seam, new smaller hex head with washer and reinforced underside; To screw, use a 10 mm hex key.

The battery life of the hand drill is extended as the holes must only be 6mm wide and 60mm deep.

This anchor is exceptionally strong and guarantees a high level of safety.

However the surface must be solid. Naturally the golden rule of dual anchors applies to all situations and all types of anchor.

This screw is excellent value for money and when needed can be reused multiple times.

TECHNICAL SPECIFICATIONS

MULTI-MONTI anchors are produced and patented by the German company HECO SCHRAUBEN KG & Co.

It is an innovative self-threading screw system and is highly resistant and practical.

The first part of the Multi-Monti thread is characterised by thread serration / teeth, that, when screwed, the anchor cuts into the material and creates the space for the rest of the screw.

Unlike traditional screw anchors, the Multi-Monti system does not exert excess tension on the rock/concrete, reducing the risk of damage or breakage.

The Multi-Monti system also differs from traditional permanent mechanical or resin anchors in that it can be easily unscrewed and reused.

This procedure should not be employed more than three times on rock and only once on granite.

Multi-Monti anchors are very resistant and reliable. Below is the Multi-Monti range stocked by RAUMER, with the corresponding dimensions, strengths and product codes.