MULTI-MONTI Ø12x100 - EX 18 GALVANIZED

art. 296 OLD

 

Item available until stock lasts. It will soon be replaced by the new MMS Plus 650A

This screw is recommended for use on rock routes (both climbing and mountaineering) and in all cases where safety is absolutely indispensable.

As with all Multi-Monti screws however, it can be retrieved after use by simply unscrewing it, to be reused on a future project (with the exception of on granite).

This anchor is the strongest in our range and its placement is relatively simple, requiring only limited experience.

Even though the screw’s dimensions and length in particular allow for use in softer or less compact rock, it is recommended that it be placed in an area of generally good rock.

To screw, use an 18mm hex key.

TECHNICAL SPECIFICATIONS

MULTI-MONTI anchors are produced and patented by the German company HECO SCHRAUBEN KG & Co.

It is an innovative self-threading screw system and is highly resistant and practical.

The first part of the Multi-Monti thread is characterised by thread serration/teeth.

When screwed, the anchor cuts into the material and creates the space for the rest of the screw.

Unlike traditional screw anchors, the Multi-Monti system does not exert excess tension on the material, reducing the risk of damage or breakage.

The Multi-Monti system also differs from traditional permanent mechanical or resin anchors in that it can be easily unscrewed and reused.

This procedure should not be employed more than three times on rock and only once on granite.

Multi-Monti anchors are very resistant and reliable. Below is the Multi-Monti range stocked by RAUMER, with the corresponding dimensions, strengths and product codes.

Weight 71,70 gr