Italiano English Franais Espaol

PRODUCTS > Stainless Steel Carabiners


Item 600 - Art. 600 - Connector R5000 - Close Type

Art. 600 – R5000 – Close type

New Stainless Steel Connector ideal for outdoor environments and designed forclimbing, caving, canyoning and mountaineering.

The new connector is certainly more powerful than art. 165 and replaces it.

New design, smaller and softer shape, without sharp edges; housing a double rope is much facilitated; much less possibility of accidental leakage of the rope!

It allows the arrangement of anchors and belay system and protects those who use it against falls from a height.

Warning: On request it is possible to provide the position bar separately. The carabiner placement will be greatly facilitated and simply fix the bar with a hammer blow.

Description

  • Openable device which enables a mauntaineer to link himself directly or indirectly to an anchor, for use anywhere in a belay system.
  • with a Ø12 body; the thickness of the steel has been designed not only to increase strength against breakage but also to prolong the “life” of the carabiner, which can otherwise be compromised by heavy use.
  • The wiregate is created in high tensile steel
  • The wiregate’s shape also prevents accidental opening when horizontally weight-loaded.
  • Special shaping of the engagement tooth which determines an exceptional tensile traction strength
  • In the upper area there's a little bar, that creates the immovability of the carabiner from its place and then, at the same time, it also prevents accidental tipping: the connector "working" well and always with the right set - see the attached data sheet.
  • After a very frequent use the rope has unfortunately worn this carabiner (nothing is forever!).
  • With a large clamp you can then act on the rod (which is welded into only one side...) and bend it enough, until you can remove the carabiner from its seat and replace it with a new one by performing all the steps in the way reverse.

 

Technical Specifications

  • Material of the body: Stainless Steel AISI 316L
  • Materiale of the wiregate: Stainless Steel AISI 302
  • Made in Italy
  • From 2013 the material used in the majority of our anchors is now stainless steel AISI 316L, which offers a higher resistance to marine corrosion than the former AISI 304. To highlight this change each article is stamped with the relevant symbols.
  • Available in “MARINA” Version - Art. 600 M highly resistant to saline corrosion: the anchors have been marked with a fish symbol and the initials “INOX"

 

Certifications

  • CE EN 12275: 2013 – Class B Connector
  • UIAA

 

References

  • Weight: 204 gr
  • Breaking Load Major Axis – gate closed: 45 KN
  • Breaking Load Major Axis - gate opened: 14 KN
  • Breaking Load Minor Axis: 25 KN
  • Dimensions: 119 x 56 mm
  • Warranty: 3 anni

 

Technical informations .pdf

Please, read, understand and keep the following documents along with the device:

  • General Informations
  • Technical data sheet
  • Inspection sheet
  • Certifications
  • Standards about Raumer's products
  • The stainless steels and their corrosion


WEIGHT 204 g
PRICE --





Reference categories for this product
[ caving ]
[ mountaineering ]
[ canyoning ]
[ climbing ]




ACCESSORIES